• VT M2M M4 4
  • VT M2M M4 5
  • VT M2M M4 6

VT-M2M-M4

Vantron VT-M2M-M4 is an extremely low-power, low-cost, configurable, and programmable gateway specifically designed for Machine-to-Machine (M2M) communication and Internet of Things (IoT) applications.

Based on an industrial MCU processor, this device provides various wireless supports including 2G/GPRS/3G/4G/LTE cellular, WLAN, GPS, Zigbee, Lora, Bluetooth, and Iridium (9603). This device supports interface I/Os including one Ethernet, RS-232/485, USB, and GPIOs. In addition, it also supports internal battery operation and can be powered by a solar panel.

This device has the IP65 protection (Optional IP67) and a wide-range power supply input (4-36V) and runs Linux. The Software Development Kit (SDK) is available.

System

RAMOn Chip 256KB SRAM
FlashOn Chip 1024KB Flash
StorageExtended 2MB (up to 8MB) SPI Flash, for saving data

Wireless Communication

Cellularmini-PCIe 4G/GPRS module, in USB or UART interface, Flexible for the selection of kinds module by customer.
WLANOptional Embedded 80.211 b/g/n WLAN Module
ZigBee/LoRaOptional, or RF 2.4G
GPSuBlox: NEO-6M, Support GPS (Optional BeiDou)
Satellite (Optional)Optional support Iridium Satellite Modem based on NAL: 9603-I or others (Actived by customer)
AntennaInternal antennas, Support external antenna by different cable & enclosure

I/O

EthernetOptional pin out 1x10/100Base-T by M12 connector
USBOptional, 1xUSB Host, Pin out to M12
AccelerometerFreeScale:MMA8451
Temp SensorTI:TMP112, +/- 0.5°C
RTCSupported
LEDStatus LED (Charging / Alive / Report / Status)
COM Port1xRS232, Audio jack, for Local Configure Optional, 1xRS232, isolated, 8x1.25mm, pin out to M12. Optional, 1xSDI-12, 8x1.25mm, pin out to M12. Optional, 1xRS485, isolated, 8x1.25mm, pin out to M12.
GPIOs (Optional)1xGPIO IN (with transient protection), Option 4xGPIO IN 1xRelay Output, Drive >8A/220VAC, optional 3x Relay
Analogs (Optional)1 or 2xAnalog Input, 12bit, support 4-20mA or 0-5V Input, High input impedance, with Transient protection

Software

OSReal-Time OS
ApplicationsProvide SDK and transparent communication. Support Over the air update. Power management of DC and battery monitor. Optional: Support at least 1 Geofence, Radial can be set, Position report once a day or report on motion, and store 30 days of position reports.

Power

DC InputDC 5V/12V/24V (4-36V) Support Kinds of Solar Pad
BatteryInternal Battery, Manually Changeable, with IP67 Cover, 3.7V, 6Ah Battery Supported.
ConsumptionUltra-low consumption, 2W pulse, 100uA Idle Without Solar Input can work 1 week, once report a day.

Mechanical

Dimensions160(L) x 118(W) x 53(H)
WeightTBD – As Light As Possible
EnclosureBlack Plastic Box, IP67 Optional Spec (J1455 (Cab/Chassis Mount), Chemical Resistance, UV Resistant, Gravel Bombardment)
MountingOptional DIN method, or Magnetic mount method, or with Mounting Bolts / Zip Tie

Environment Condition

TemperatureOperating:-40°C~+85°C (Lower temperature battery may reduce the capacitance) Storage: -20°C ~ +70°C, (ETR:-40°C ~ +85°C Optional)
Humidity5-95%RH at 25-35 (Non-Condensation)
Cooling ModeFan less
ApprovalsUL, FCC Class A, and CE, RoHS Compliance

Contact us to get more information.