• VT DTU 1808 1
  • VT DTU 1808 2
  • VT DTU 1808 3
  • VT DTU 1808 4
  • VT DTU 1808 5


Vantron VT-DTU-1808 is a low-power, cost-effective, configurable, and programmable device specifically designed for Machine-to-Machine (M2M) communication and Internet of Things (IoT) applications.

Powered by an industrial ARM9 Low Power processor, this embedded device has integrated an internal WiFi and Bluetooth module supporting 802.11 ac/a/b/g/n at both 2.4GHz and 5GHz and BT4.1. The device also supports the interface I/Os including RS-232, RS-485, and CAN bus. It has the IP65 protection (Option IP67) and a wide-range power supply input (8-36V). The product runs Linux OS. A Software Development Kit (SDK) is available.


Processor456MHz Low Power Processor
On Board Memory RAM: DDR 156MHz, 128MB ROM: NAND Flash, 128MB
Extended Memory 1xmicro-SD Connector,1x9x1.25,Vert (inner side for programming and update)


COM Port1XRS485,Half or full duplex, optional isolate (On 8Pin M12 connector) 1XRS232,3-Wires (On 8pin M12) 1XUART,TTL,4-Wires (Optional inner side) 1x RS232, for Debug (1x3x1.25mm connector, internal) Optional 10/100M Ethernet port (RJ45)
CAN1xCAN 2.0b (Optional inner side)

Wireless Communication

WLAN 802.11 a/b/g/n/ac, 2.4G&5GHz


OSSupported: Linux
SDKSupported, Application for WLAN to RS485 or RS232 transparently


Input 8-36V Input


Dimensions 136.5 x 76.5 x 31.5mm (without DIN or mounting bracket) 136.5 x 76.5 x 39.5mm (With DIN) 136.5 x 100 x 33.5mm (With mounting bracket)
ProtectionIP65 (Optional IP67) (No IP if with Ethernet port)

Environment Condition

Temperature Operating:-10℃ ~ +70℃, (ETR:-40℃ ~ +85℃ optional) Storage: -40℃ ~ +85℃
Humidity 10-85%RH (Non-Condensation), operating and storage
Cooling ModeFanless
ApprovalsRoHS Compliance, CE, FCC, UL in certification

Contact us to get more information.